259s CWG – kits, PCBs & panels

0,00 749,00 

incl. VAT

plus shipping

Please read the disclaimer in the description !

69,00 

Delivery time: 1-2 days

199,00 

Delivery time: 1-2 days

749,00 

Delivery time: 1-4 days

57,60 

Kits, PCBs and panels for the 259s CWG DIY synthesizer module.

The PCBs are blue with golden solder pads. Every component is through-hole.

The full kit includes everything you need to build the module. Only high quality components from TDK, KOA-Speer, Nichicon, Xicon, NKK etc. Precision DIP sockets are included as well to make IC replacements easier.

Apart from that you will need basic things like a soldering iron, solder, wires, other tools like screwdrivers and skills 😉

MAT02 replacement = KC811 / MAT03 replacement = 2N3806

DISCLAIMER

The PCBs are sold unpopulated and need to be stuffed by yourself. Basic electronic skills are needed.

We will not take any responsibility for damages or injuries when building and running the offered PCBs or full sets.

Parts from the BOM you might like to add if you don’t buy the full kit – see below:

2x ribbon cables – 26pin

2x Alpha 16mm pots – 100k log

6x Alpha 16mm pots – 100k lin

5x Alpha 9mm pots – 100k lin

8x additional nuts for Alpha pots

4x 15mm I/I standoffs

4x 30mm I/I standoffs

Blue and white switchcaps

1x EDAC power connector 10-pin

1x Rogan knob set for 259

2x 2N3806 (MAT03 replacement)

2x KC-811 (MAT02 replacement)

5x Xvive VTL5C3/2 vactrols

3x Xvive VTL5C3 vactrols

BOM

Build notes

  1. The J201 tends to have a flat shaped sine wave. For a more accurate sine please install a selected 2N4339 instead. They are available here: 2N4339 Please check the pinout when installing ! Picture will be added soon.
  2. Add a 20k multiturn trimmer across R290A for amp-mod adjustments along with TR3
  3. Solder wires to connect the following pin: a, b, c, d, e, f, i, 6-6a, 10-10a. Pins g and h are already bridged on our PCBs.
  4. If Timbre is too weak, try other PN3958 or 2N3958. Trim Timbre by adjusting TR2.
error: