259 Complex Waveform Generator DIY module.
The PCBs are matte black or blue with golden solder pads. Every component is through-hole.
The full kit includes everything you need to build the module. Only high quality components from TDK, KOA-Speer, Nichicon, Xicon, NKK etc. Precision DIP sockets are included as well to make IC replacements easier.
Apart from that you will need basic things like a soldering iron, solder, wires, other tools like screwdrivers and skills 😉
MAT02 replacement = KC811 / MAT03 replacement = 2N3806
The PCBs are sold unpopulated and need to be stuffed by yourself. Basic electronic skills are needed.
We will not take any responsibility for damages or injuries when building and running the offered PCBs or full sets.
Parts from the BOM you might like to add if you don’t buy the full kit – see below:
2x ribbon cables – 26pin
2x Alpha 16mm pots – 100k log
6x Alpha 16mm pots – 100k lin
5x Alpha 9mm pots – 100k lin
8x additional nuts for Alpha pots
4x 15mm I/I standoffs
4x 30mm I/I standoffs
Blue and white switchcaps
1x EDAC power connector 10-pin
1x Rogan knob set for 259
2x 2N3806 (MAT03 replacement)
2x KC-811 (MAT02 replacement)
5x Xvive VTL5C3/2 vactrols
3x Xvive VTL5C3 vactrols