208 Toolbox (full kit)
Portabellabz 208 Toolbox BATCH 4 – full kit. Comes with everything needed to build the basic cartridge.
Sliders, knobs, pots, caps, resistors, diodes, LEDs, switchcaps, edge connector and PCBs. 5 resistors of your choice for the customizable section can be added.
208 Toolbox (parts kit)
Portabellabz 208 Toolbox BATCH 4 – only parts. All parts EXCEPT 208 Toolkit PCBs.
Sliders, knobs, pots, caps, resistors, diodes, LEDs, switchcaps and edge connector. 5 resistors of your choice for the customizable section can be added.
208 Toolbox BOB Expander (full kit)
Portabellabz 208 Toolbox BOB Expander. All parts needed to build the basic BOB Expander
208 Toolbox BOB Expander – (parts kit)
All parts needed to build the basic BOB Expander except the PCBs.
Buchla 208 hardware kit
The kit includes: 14x VTL5C3 vactrols, 22x 50k Alps sliders, 8x potentiometers, 45x switchcaps, 8x Rogan knobs and 2x EDAC 56pin connectors, 8x standoff bolts and screws
Switch / Slider caps (10pcs) or kits
Black, Red, Blue, White, Yellow switch caps.
For Rogan knob kits klick here
Switchcraft Tinijax jack
Switchcraft 41 Tinijax jack – used on nearly every Buchla module. Also needed for the 208 Toolbox, if you want to add an optional Banana to audio converter to the customizable section.
Banana jacks in various colours.
56pin edge connector
56pin edge connector for the 208 Easel
LW-N28A2G connector for the 208 Toolbox and BOB
10pin EDAC connector
10pin EDAC connector for all Buchla builds. This connector is an essential part to provide a power connection to every Buchla module.
M3 standoff bolts for your case and Buchla builds. For powered boats you'll need 15mm I/I – for passive boats 10mm I/I. Most modules need 15mm between panel and PCB – 12mm between PCBs only.
Xvive vactrols / optocouplers
ALPS RS4511150K slider
Used on 206r, 207r, 208r, 227r, 248r, 248-Exp, 294r, 295r, 296r
Alpha 9mm potentiometer
Alpha 9mm potentiometers (vertical) in most common values.
Alpha 16mm potentiometer
Alpha 16mm potentiometers (angled) in most common values. Please don't forget to add the additional nut for proper panel mounting if needed.
CA3080AE for all Buchla builds that require the rare CA3080 chip.
V2164D VCA IC
V2164D VCA chip for all Buchla builds that require this VCA chip.
MC846P Quad 2-input NAND Gate
MC846P Quad 2-input NAND Gate. Used in Buchla 208 clone.
2N3806 dual PNP transistor
2N3806 dual PNP transistor. Used in 208 / 258C / 259r as a replacement for the MAT03.
DG200BA Dual SPST Analog Switches
DG200BA Dual SPST Analog Switches. Used in the 208 clone build.
2N4339 N-Channel JFET – selected
2N4339 N-Channel JFET – selected for an IDSS of 0.7mA – 1.2mA. Needed for the 208 build.